Webinars On Demand: Know Your HSS Welds (April 2022)

Description

Guest presenter Kim Olson from Nucor Corporation will discuss how the design, detailing and fabrication processes for HSS members are quite different than those typically employed for open section members and plates. This all-encompassing session on HSS welding will help designers demystify some of the complexities of HSS fabrication.

Learning Objectives

• • Identify factors that contribute to difficult HSS fabrication and how to avoid them
  • Understand how and when HSS member access affects weld choices
  • Compare suitability of CJP vs. PJP welds in HSS sections
  • Review welding positions and qualifications

Professional Development Hours
You can earn 1.0 PDH or 1.0 LU and receive a certificate of completion from the Steel Tube Institute (STI) by purchasing and passing a quiz. Select from one of the quiz options above.

• After watching the video you will need to complete a 10-question multiple choice quiz.
• Upon correctly answering 7 out of the 10 questions, your PDH or LU certificate will be issued within 5 business days.

Webinar on Demand Fees
The recorded webinar video is free to view. The PDH or LU quiz is available for $25 for HSS Professional Members and $35 for non-members. You will receive access to the webinar and/or quiz in your order receipt.  You may also access them through your account in Past Orders after you have completed your purchase.

AIA CES Provider statement
The Steel Tube Institute is a registered provider of AIA-approved continuing education under Provider Number 50111160, expiration 12/31/2024. All registered AIA CES Providers must comply with the AIA Standards for Continuing Education Programs. Any questions or concerns about this provider or this learning program may be sent to AIA CES ([email protected] or (800) AIA 3837, Option 3).

This learning program is registered with AIA CES for continuing professional education. As such, it does not include content that may be deemed or construed to be an approval or endorsement by the AIA of any material of construction or any method or manner of handling, using, distributing, or dealing in any material or product.

AIA continuing education credit has been reviewed and approved by AIA CES. Learners must complete the entire learning program to receive continuing education credit. AIA continuing education Learning Units earned upon completion of this course will be reported to AIA CES for AIA members. Certificates of Completion for both AIA members and non-AIA members are available upon request.