AISC 360-16 Limit State Tables

$0.00

SKU: HSS_LST_360-16 Category:

Description

The AISC 360-16 Specification has significant changes to Chapter K. To help designers navigate these changes, we have created the following Limit State Tables. We hope you find them helpful and if you have any questions or comments, please contact our technical team.

  • SHEAR
    • Single Plate, Through Plate, Single Angle
    • Double Angle, WT, Unstiffened Seat, Stiffened Sea
  • AXIAL
    • Plate – to – Round HSS Connections
    • Plate – to – Rectangular HSS Connections
  • TRUSS
    • Round HSS – to – HSS Truss Connections
    • Rectangular HSS – to – HSS Truss Connections
  • MOMENT
    • Round HSS – to – HSS Moment Connections
    • Rectangular HSS – to – HSS Moment Connections
  • Limit State Table Notes

All rights reserved. These documents or any part thereof is for individual use only and must not be reproduced or distributed in any form without the written consent of the Steel Tube Institute.  While these documents, tables and information are believed to be accurate, they have not been prepared for conventional use as an engineering or construction document and should not be used or relied upon for any specific application without competent professional examination and verification of their accuracy, suitability, and applicability by a licensed engineer, architect or other professional.  The Steel Tube Institute and its consultants disclaim any liability arising from information provided by others or from the use of the information contained in these documents.

Additional information

Licensing

All rights reserved. These documents or any part thereof is for individual use only and must not be reproduced or distributed in any form without the written consent of the Steel Tube Institute.

You may also like…